#Windows 98 usb ethernet adapter driver install
Install a PCI Client AdapterĬomplete these steps to install the PCI client adapter. If the PC card does not insert easily, remove the card and reinsert it. This can damage both the card and the slot. Note: Do not force the PC card into your computer PC card slot. Apply just enough pressure to make sure it is fully seated. Hold the PC card with the Cisco logo facing up and insert it into the PC card slot. The card is keyed so you can only insert it one way into the PC card slot. One end has a dual-row, 68-pin PC card connector. Installing a PC Cardīefore you begin, examine the PC card. If you download the driver, expand the self-extracting archive into a temporary folder and note the path of the folder, such as c:\windows\temp.
#Windows 98 usb ethernet adapter driver drivers
Note: If you do not have a CD-ROM with the proper drivers, you should download the drivers before you replace your computer network interface card with the Cisco Aironet Client Adapter. This section discusses the installation of the hardware to the PC. Refer to Cisco Technical Tips Conventions for more information on document conventions. If your network is live, make sure that you understand the potential impact of any command. All of the devices used in this document started with a cleared (default) configuration. The information in this document was created from the devices in a specific lab environment.
Network Driver Interface Specification (NDIS) driver version 6.64 Toshiba Tecra8000 laptop computer running Microsoft Windows 95 Version BĬisco Aironet Client Adapter AIR-PCM342 loaded with firmware version 4.23 The information in this document is based on these software and hardware versions: The Windows 95 drivers and utilities, which can be found on the CD-ROM that accompanied the client adapter card or you can download it from the Wireless Download Center ( registered customers only). You need these items to complete this installation:Ī Cisco Aironet 340 or 350 series client adapter card. Refer to Installing the Driver for Windows 98, Installing the Driver for Windows NT, or Installing Windows 2000 Drivers and Utilities for more information.
There are, however, some key differences.
Note: The installation methods described here are similar to those used for Windows 98, Windows NT, and Windows 2000. This document is a guide to installing Windows 95 drivers and utilities for the Cisco Aironet 340 and 350 Series Client Adapters.
0 kommentar(er)
